Friday, December 16, 2011

Sources: Apple will release larger iPad in 2012 under heat from Kindle

To cope with increasing market competition including the 7-inch Kindle Fire from Amazon and the launch of large-size smartphones from handset vendors, Apple has been persuaded to develop and is likely to launch a 7.85-inch iPad prior to Q4 of 2012 -- in addition to the new iPad scheduled to be released at the end of the first quarter -- according to supply chain sources cited by the Taiwan technology and manufacturing news site DigiTimes.

Global shipments of tablet PCs are expected to reach 60 million units in 2011, of which 70% will be Apple's iPads, notes DigiTimes.

Friday, December 2, 2011

Elastic electrical cabling a short span to more advanced automation, robotics designs


Popular Science is reporting that Japanese Spandex-maker Asahi Kasei Fibers has developed what is being billed as the world’s first elastic electrical cable. Dubbed Roboden, the stretchable cord/conductive connector is already available in form of USB cables and standard power cords, which definitely serve to reduce multi-cord clutter while providing that extra bit of reach needed to find the wall socket -- but that's not all. As forecasted by PopSci.com, Roboden may soon enable new generations of electronics-embedded textiles and robotic skins.

The technology's real upside is predicted to be in the realm of automated machinery and robotics, where connecting cables routinely must be as long as a machine's maximum range of motion to allow for unrestricted operation. This engenders a lot of slack cord. With Roboden, the cord stretches when the robot/machine moves and pulls taut when the machine relaxes the tension, keeping extra cord from getting in the way.

And when the day comes to start sheathing humanoid robots in soft, skin-like coverings, stretchable electronics and chips will no doubt figure among the front-running technologies to make you say...yikes.



Wednesday, November 23, 2011

Kindle Fire teardown determines BoM cost skew; Amazon unconcerned



A teardown analysis by IHS iSuppli reveals that Amazon.com’s Kindle Fire tablet most likely costs just a bit more to make than what it actually sells for, confirming "what everyone has suspected for a while — that Amazon expects to lose a little money up front on the $199 Fire, in hope of selling in volume," writes WSJ All ThingsD blogger Arik Hesseldahl. The digital retailer hopes to make more money on sales of the digital media and physical goods consumers may order from Amazon on the device, adds the blog. Amazon’s sales model with the Kindle Fire store is now generally understood to be essentially opposite to rival Apple’s precursor version of same.


Friday, November 11, 2011

China counterfeit electronics found in U.S. military aircraft; Senate committee warns of 'ticking time bomb'

As reported by The Washington Post and Bloomberg, dozens of suspected counterfeit electronics parts were revealed to have been installed on U.S. defense equipment from Raytheon, L-3 Communications, and Boeing -- including in aircraft deployed to Afghanistan. The Senate Armed Services Committee said it discovered counterfeit parts, usually originating from China, in at least seven aircraft, including the Lockheed Martin Corp. C-130J transport plane, Boeing P-8A Poseidon maritime patrol and L-3 27J Spartan transport, as well as in helicopter night vision systems and aircraft video display units.

Michigan Senator Carl Levin, the committee's chairman, said that none of the counterfeit findings were connected to instances of lives lost or dramatic failures causing an aircraft crash. Nonetheless, Levin stressed that the committee staff has “identified lots of places where, unless that correction was made, there was real fear that those kind of disastrous consequences could take place.” Company executives, a Defense Department official, government investigators and a representative from the semiconductor industry all testified before the committee about the "ticking time bomb" of suspect counterfeit electronics eventually ending up in weapons systems.











Monday, November 7, 2011

Google lawyer says patent disputes thwart mobile device innovation

Google's Android operating system has enabled companies such as HTC, Motorola and Samsung to come forth with devices that can compete with Apple's iPhone. And as noted at Digital Spy, Google's patent counsel Tim Porter warned in a recent San Francisco Chronicle interview that the subsequent rash of legal wrangles over patents serves only to threaten innovation across the mobile device industry, because "the concern is that the more people get distracted with litigation, the less they'll be inventing."

According to Porter, "You can look at the development of the software industry and see a point when [software wasn't being patented] and it was a period of intense innovation. You didn't see Microsoft's first software patent until 1988. By that time it had come out with Word, not to mention DOS. So there's just no question you can look back and see that innovation happens without patents. It's also true that since there weren't patents, there wasn't software patent litigation."

Monday, October 24, 2011

Leaked images suggest smaller dock connector for Apple iPad3



Part photos revealed by an Asian supplier website, purporting to represent an Apple iPad 3 prototype design, seem to indicate that the next generation of the tablet PC will feature a slimmer, smaller connector that shrinks the familiar 30-pin configuration into a streamlined form factor that would presumably result in incompatibilities with current dock connector accessories.

As reported by The iPad Guide's Fred Straker, "It's possible that if a new connector is introduced on the iPad 3, other Apple products including the iPhone would follow. A simple adapter could be produced for backward compatibility with larger dock connectors assuming the 30-pin innards of the parts have not changed. A smaller connector would give Apple more latitude in designing even thinner and lighter mobile devices."

The tech bloggers at PadGadget, however, speculate that rumors of the smaller connector will prove false, while holding out hope that the iPad 3 will instead bear Apple's MagSafe connector. We shall see!








Tuesday, October 18, 2011

Apple share dive stuns Wall Street

Reuters is reporting that Apple has experienced some rare disappointment as its share value plummeted in the wake of lackluster quarterly results. Revenue and earnings for the world's most valuable technology corporation reportedly fell short of Wall Street's targets, as sales of its flagship iPhone also came in well short of expectations. The company's CFO explained that iPhone sales came in ahead of internal expectations but were hurt in September by customers waiting for a new version. The September quarterly report was Apple's first under new CEO Tim Cook, who takes over during a critical juncture for the company. As noted by Reuters, Apple is currently battling the fast-rising Google Inc. in the mobile arena, while fending off consumer electronics giants such as Samsung and Amazon.com.




Wednesday, October 12, 2011

Sources: Foxconn Brazil's $12B iPad deal could implode

According to sources cited in a Reuters report, Apple contract manufacturing partner Foxconn's much publicized $12 billion plan to produce iPads in Brazil is now "in doubt" due to "stagnant negotiations over tax breaks and Brazil's own deep structural problems such as a lack of skilled labor." The report states that, while the initial proposal to build Apple's sleek tablet PCs in Brazil was hailed as a sign of the country's burgeoning economic ties with Asia and overall economic growth, hopes for the "Brazilian iPad" have reportedly since withered, as certain local realities have remained unchanged. These include factories that have struggled for years with high taxes, an overvalued currency, and a lack of qualified workers due to poor education and a tight labor market.


Thursday, October 6, 2011

Steve Jobs made technology luminaries of us all

BusinessWeek has gathered an assortment of quotes from the world's foremost technology and new media executives, offering thoughts, memories, and reflections on the passing of one of the true titans of the Internet age: Apple's Steve Jobs. His extraordinary acumen in melding the realms of technology and business with creativity to provide the vivid, integral template that the Apple ethos has come to represent for millions in their digitally connected lives will be best remembered in terms of gratitude. He has been compared to Thomas Edison, Henry Ford and John Lennon in the epochal nature and magnetic popular appeal of his conceptions. For the democratizing effect of bringing the benefits of "insanely great" computer technology to the common person for their traversal of our now irrevocably interconnected digital world, history may yet place his legacy at an even higher plane. He will be sorely missed; but, for the brilliant execution of his universal vision in the devices he conceived for us, safely said, never forgotten.




Wednesday, October 5, 2011

Apple issues Micro USB to dock connector for iPad, iPhone



In Europe, Apple will soon be offering a Micro USB to Dock connector adapter for the iPhone and iPad. The heavy emergence of the Micro USB standard, specifying a small form factor USB connector, was officialized when the connector was approved by the Open Mobile Terminal Platform (OMTP) and three global industry bodies as the industry charging standard for mobile handsets, on the heels of its approval in Europe as the industry standard universal connector for all mobile handsets. These moves came in an effort to consolidate handset charging connectivity with an eye toward reducing the volume of electronics product in landfills globally, as each subsequent generation of handsets' "proprietary" dongles go into them as trash.

Apple's issuing the new adapter, however, has Macgasm's tech blogger Joshua Schnell scratching his head:

"Thankfully it’s cheap enough that it may encourage people to pick up the connector instead of purchasing numerous cables. However, I’m not exactly sure how the EU thinks creating connectors will help the problem, despite allowing companies to create adapters instead of changing their devices to meet the new standard. In addition to shipping all iOS devices with a dock connector cable, Apple will also begin shipping a Dock to USB conversion connector. Doesn’t that just double the stuff going into landfills? Apple met their requirements in the EU, but something tells me the EU folks calling these shots didn’t exactly realize that they could be making the problem worse. Instead of looking for a new cable, customers will begin looking for a new dock connector conversion adapter. What’s the difference?"












Friday, September 30, 2011

United/Continental airlines chief: Boeing 787 a 'game-changer'

The head of United and Continental airlines said this week that he was told by Boeing that the first of fifty 787 Dreamliner aircraft ordered by his company will be delivered for tarmac service sometime in the second half of 2012. "We ordered that aircraft in December 2004. So I've been a very patient person," said Jeff Smisek, president and CEO of United Continental Holdings, the airlines' parent company, as quoted in an Associated Press (AP) report. Despite the delays, Smisek called the wide-body jetliner "a spectacular and game-changing aircraft."

As noted by the AP, the 787 is the first commercial airliner built using stronger, more lightweight carbon fiber, rather than the typical aluminum skin. As a result, the 787 is quieter and uses about 20 percent less fuel than a comparably sized aluminum aircraft. "That's staggering," Smisek said, with regard to the fuel savings. "If you substitute them for an existing aircraft, your profits will improve like that. It will also permit us to fly routes we couldn't otherwise profitably fly. So it's really a home run."








Monday, September 26, 2011

First Boeing 787 shipments should equal immediate boon for many parts suppliers

Boeing has at long last delivered its 787 Dreamliner to Air Nippon Airways -- three years late, and not without difficulties, but with the potential to become the first of thousands of planes produced. And as noted by Christopher Hinton writing for MarketWatch, though it may take years for the aerospace giant to recoup the costs of the Dreamliner's development and declare it profitable, many 787 supplier companies may expect a more rapid uptick in earnings.

“Part suppliers have better profit margins than the air framers and they had less development costs,” explained Michael Lew, an aerospace analyst interviewed by MarketWatch. “But the margins for suppliers are varying."

Lew added, "Materials suppliers...have better margins as their product is usually manufactured for one-time use -- that is, the life of the plane -- whereas engine suppliers are more dependent on aftermarket and margins could be lower.”

Full Article: First Boeing 787 a boost for parts makers (marketwatch.com)









Wednesday, September 21, 2011

Is Apple flanking Intel on USB 3.0?

A new report uncovered at AppleInsider claims that Apple is forging ahead with plans to implement USB 3.0 in its Mac computers -- independent of Intel's plans to eventually support USB 3.0 at the chipset level. The reporting cites an anonymous source who claims Apple is "still looking" at USB 3.0 for future products and may beat Intel in supporting the standard. Though Apple has long been rumored to be eyeing USB 3.0 capability for the Mac, the company's recent commitment to the high-speed Thunderbolt interconnect has dampened talk of its getting into the USB 3.0 game. Nonetheless, according to the report, USB 3.0 host controllers may have finally reached an "affordable level" for Apple -- roughly $2-3 each in large quantities, compared to $10-15 for Intel's Thunderbolt chip -- and speculation is that the rumored move to incorporate the technology may be intended to help Apple cater to consumers who don't need or aren't interested in owning high-end Thunderbolt products.


Friday, September 16, 2011

Apple's Thunderbolt: Could one port rule them all?

Odds are that Apple's Thunderbolt I/O -- fruit of Intel's erstwhile Light Peak technology -- will eventually enjoy at least the same ubiquity as FireWire once had within the Apple ecosystem. However, as suggested by CNET's Harry McCracken, what's less clear is whether the technology will take hold in the larger, largely Windows-centric PC industry outside of Apple's sphere of influence. McCracken observes that there's no need for PCs to have Thunderbolt ports unless there's peripheral devices to plug into them -- and that Thunderbolt peripheral devices will be useless to vast numbers of consumers unless there are PCs that can accommodate them. And, while Apple can pretty much mint any technology as its own standard by plugging it into all Macs, standards only happen in the rest of the industry if companies from the wide world of PC manufacturers such Acer, Asus, Dell, Hewlett-Packard, Lenovo, Sony, and many others, all think they're a good idea. Then, even when consensus comes, change can take a lot of time -- unless, of course, it doesn't.








Wednesday, September 14, 2011

Lithium polymer 'jelly batteries' could enable more efficient laptops, electric vehicles

A new type of polymer jelly being studied and developed by researchers at the UK's University of Leeds would replace the volatile and hazardous liquid electrolyte currently used in most lithium batteries. Reporting from the BBC News - Science/Environment section says that the newly developed jelly batteries are designed to prevent "thermal runaway" -- the "worst-case" phenomenon whereby conventional lithium batteries using electrolytes based on organic liquids can escalate hundreds of degrees in temperature and catch fire. The Leeds researchers say that their discovery's success lies in blending a rubber-like polymer with a conductive, liquid electrolyte into a thin, flexible film of gel that sits between the battery electrodes. "The polymer gel looks like a solid film, but it actually contains about 70% liquid electrolyte," explained the study's lead author, Professor Ian Ward.

The Leeds scientists claim that that their proposed jelly batteries are as safe as polymer batteries, perform like liquid-filled batteries, but at 10 - 20% the price of either. Should they reach the market, the lithium jelly batteries could allow for lighter laptop computers, and more efficient electric cars.






Friday, September 9, 2011

Electric car industry lines up to display clean energy vehicles

The big automakers of electric car industry gathered last month in Las Vegas to exhibit multiple production vehicles at this year's National Clean Energy Summit 4.0. Exhibitions included the Nissan Leaf, Chevy Volt, Mitsubishi i-MiEV, a Ford Transit Connect compact van conversion from Azure Dynamics, a CODA electric sedan, and two utility vehicles from Xtreme Green Products Inc. Additionally, and not least, quite a heavy roster from federal officialdom participated in the annual summit event, including senators, governors of U.S. Western states, along with the U.S. Navy Secretary and another DoD official, as described in a detailed report by the Las Vegas Review-Journal.


On the coattails of the summit, this year continues to shape up as a great one for the EV industry, what with the follow-along recent announcement of federal funding for EV infrastructure planning and workforce training, and -- the real bonanza -- the U.S. DoE's award of $16.9 million to advance funding for electric vehicle adoption and research.






Wednesday, August 31, 2011

TV tuner streams live content via iPad's 30-pin dock connector

As seen at CNET, Elgato, a maker of Mac accessories, has released its EyeTV Mobile iPad 2 TV Tuner, a proprietary dongle for the iPad 2 for streaming live television via mobile sources. The dongle connects to the iPad's ubiquitous 30-pin dock connector; its retractable aerial antenna picks up local broadcast television signals. The device includes a free app that allows users to Tivo-esquely record live programs to the iPad 2 to watch later. The tuner supports broadcasts in DVB (Digital Video Broadcast) transmissions -- a global standard in most first- and second-world countries. So, the gadget is only available in Europe, so far. No word yet on the existence of any analogous North American ATSC M/H (I am assuming) device...yet.












Wednesday, August 24, 2011

Apple to include magnetic connector in future iPads


Patently Apple is reporting that Apple has been granted a U.S. patent for the assembly of a unit supporting the MagSafe connector into an iOS device like an iPad. The patent reportedly states that "in one particular embodiment, the connector may be a power connector such as the MagSafe." The MagSafe power connector adheres to the unit by a magnet as opposed to being held in place purely by port insertion into the port; newer model MacBooks are equipped with the connector design for their power adapters. Parents of small children and the accident-prone value the MagSafe connectors, as a tug on the cord releases the connection, alleviating the dreaded "laptop hitting the floor" syndrome in the event of a tug on the power cord.

Wednesday, August 17, 2011

Precious metal thieves scale all cell tower heights

The Enterprise of Brockton, MA has reported that police were called to a Verizon cell tower near Route 140 in Lakeville, MA to find a male individual engaged in a literal high wire attempt to steal the copper grounding plates used to protect the towers in the event of lightning strikes. “He was over 100 feet above ground,” relayed Lakeville Police Chief Frank Alvilhiera. “This has been the trend with copper prices high. Thefts are on the rise everywhere.” The reporting continues to note that, in nearby New Hampshire, three cell towers were targeted in the towns of Salem and Londonderry during the last weekend in June; and that, in April, two men were arrested in Salem, NH and charged with stealing copper wire from National Grid.

This sort of theft has indeed been rampant everywhere. Some experts have speculated that rising copper prices and theft may drive up demand for fiber deployments in the telecom space. Other players in the industry have suggested that copper alternative solutions may help to reduce cabling theft. What do you think?

Monday, August 1, 2011

Foxconn calls on robot workforce to quell labor, suicide woes

Taiwan-based contract manufacturing colossus and noted Apple partner Foxconn says it plans to enlist a one-million strong robot workforce over the next 3 years. As reported by Reuters, the plan "highlights an increasing trend toward automation among Chinese companies as labor issues such as high-profile strikes and workers' suicides plague firms in sectors from autos to technology." Foxconn Chairman Terry Gou reportedly told China Business News that the company expects to put 1 million robots on its production lines within three years, up from about 10,000 in use now and an expected 300,000 by next year. Gou also said the company plans to move its more than 1 million human employees "up the value chain beyond basic manufacturing work."



Wednesday, July 27, 2011

Massive solar tower will rank among world's tallest buildings

As reported at Gizmag, a full-scale solar energy project of truly towering proportions is brewing in the Arizona desert. EnviroMission is presently undergoing land acquisition and site-specific engineering to build its first full-scale solar tower, a massive 800-plus meter (2625 ft) stalagmite of high technology that will instantly rank among the world's tallest buildings. The tower's 200-megawatt power generation capacity is projected to reliably feed the utility grid with enough power for 150,000 US homes -- with virtually no maintenance for more than 80 years (?!) Tall order, or sky's the limit? You decide.



Friday, July 22, 2011

How the Smart Grid will transform life as we know it

The social media news portal Mashable provides an in-depth breakdown and look into a topic we've covered before and are constantly seeking to cover more here at ICW, i.e. the rise of interconnected Smart Grid technology. As defined by Mashable, the Smart Grid is "a rapidly growing set of technologies, processes, devices and applications that affect and enhance the traditional electric grid [with technology enhancements] driven by exponentially growing demands worldwide for energy."

As reported by the social media site, the technology's rise reflects the far advances being made in Internet and mobile communications networks, as well as higher expectations from consumers regarding energy availability, rising energy costs and access to energy information. The Smart Grid will also be instrumental for integrating renewable energy sources including wind and solar into the mix of distributed utilities. The article goes on to provide perspective on Smart Grid developments and a breakdown of global Smart Grid areas of adoption.


Monday, July 18, 2011

Apple iPad3 dock connector images leaked?


As reported at the tech blogs Tapscape and The APPera, the Taiwan website Apple.pro -- notoriously known for circulating leaked images of Apple devices ahead of formal release dates -- has done it again. This time, images reportedly leaked from Apple's internal inventory reveal a white dock connector with a 90-degree tail end for an iPad-like device -- speculated to be the iPad3, owing to the fervid amount of attention being paid to that device's anticipated release. No telling, however, whether the pictured connector might not actually be for the rumored iPad HD or even, it has been suggested, the quasi-mythical iPadPro tablets.

It's not the first time the rumor mill has swirled over these small, but not insignificant, parts of these no-doubt-soon-to-be-everywhere tablet devices. That it swirls at all may tell us something about how pervasive the footprint of this technology might very soon be.





Tuesday, July 12, 2011

Tearing down Apple's Thunderbolt cable

With a little help from their friends at iFixit, the technology watchdogs at Ars Technica have dug into the design of Apple's proprietary -- and, at a retail cost of $50, some might say pricey -- Thunderbolt I/O cable. The first Thunderbolt compatible peripherals (Promise's Pegasus RAIDs) started shipping this month, and use of them requires separate purchase of the cable. As reported by Ars's Chris Foresman, "We dug into the design of the cable to find out why Apple felt justified in charging $50 for some plastic-wrapped copper wire, and why Thunderbolt may have a hard time gaining traction outside of the higher-end storage and video device market—a fate similar to Apple's FireWire."


Thursday, June 30, 2011

Apple addresses Thunderbolt FAQs

As noted at Macworld, Apple has posted a FAQ document covering ten questions that users may have regarding the use of its Thunderbolt I/O cable, recently developed in collaboration with Intel. Notable information from the FAQ includes the fact Thunderbolt has “two separate 10Gbps links -- one for displays and one for PCI-E device traffic.” Also, to maintain maximum performance, Apple recommends that a Thunderbolt cable should be no longer than two meters.


Tuesday, June 28, 2011

New building-integrated photovoltaics technology converts windows into solar panels

A Northern California company is working to develop "solar windows" that double as solar panels. Pythagoras Solar of San Mateo has received an award of $100,000 from the GE ecomagination Challenge in support of the technology's development. According to a San Francisco Chronicle report, the company's "window laced with solar cells" could generate power for office buildings while at the same time shielding offices from sunlight, reducing energy costs -- especially those associated with air-conditioning.

The SF Chronicle report notes that the Pythagoras window belongs to a class of solar equipment known as building-integrated photovoltaics (BIPV), which also includes solar window awnings and photovoltaic roofing tiles. For the window technology as developed by Pythagoras, thin horizontal rows of silicon cells embedded between dual panes of glass catch sun light from above; via a trick of optics, the window blocks direct sunlight from entering the building, cutting the amount of power required for A/C. Instead of heating the room, the captured sunlight generates clean solar power.

Interesting stuff!










Friday, June 24, 2011

Connector industry giants saw banner 2010 sales growth

Connector industry analyst firm Bishop and Associates has reported that the world's top 10 connector manufacturers including TE Connectivity, Molex, Amphenol, Yazaki, FCI, JST, Foxconn, Delphi, Hirose and JAE all saw tremendous, across the board growth of approximately 30% in 2010 -- even exceeding roughly the same percentage growth for the industry on the whole. Will be interesting to see if this dramatic uptick in business holds for 2011!

Wednesday, June 15, 2011

Unmanned agricultural helicopters add to UAV proliferation

Agricultural market chroniclers at Australia's Stock and Land hit the local farm fair circuit to cover the debut of "the Rmax chopper," a remote-controlled UAV that can be used for spraying crops and seeding, among other uses. Promoted by Yamaha, the craft's current design weighs in at 28kg, is powered by a 250cc water-cooled two stroke engine, and handles liquids or granules via attached equipment that can alternatively be replaced by cameras and sensors weighing a similar amount.

According to the report:

'The debut of the racy-looking Rmax chopper, essentially a flying computer...‘wowed’ visitors to the Yamaha stand at the Queensland-based [CRT Farmfest field days] event, where its business development manager, Liam Quigley [of Yamaha's Sky Division] had little trouble convincing visitors of its agricultural potential in Australia...

...Yamaha...operates a fleet of the machines to treat rice crops in Japan, [and] says the Rmax can spray just over three quarters of a hectare (two acres) every six minutes...

Mr. Quigley believes there is “a strong role” for the Rmax to be used anywhere for work that is “dull, dirty or dangerous” using a small spray boom to treat 7.7m wide swaths on each pass across a paddock.

Interested grower groups, and there have been quite a few, can’t actually buy an Rmax, only lease one, for about $120,000 over three years with training and maintenance included.

“We can recoup those costs because most operators I’ve spoken to would be looking to charge between $200 to $300/hour which is only a fraction of the cost of running a (full-sized) helicopter,” Mr. Quigley said.'

Full Story: Lift off for unmanned ag choppers (sl.farmonline.com.au)

Friday, June 10, 2011

IPC says 3Q sales slowdown likely for electronic interconnect orders

As noted by John Keller, chief editor of InterconnectionWorld sister site Military and Aerospace Electronics, IPC's latest market analysis concludes that combined orders for rigid printed circuit boards and flexible circuits in North America decreased for the fourth consecutive month in April, compared with the same period one year ago - while combined orders of rigid printed circuit boards and flexible circuits in the United States and Canada continued their upward trend.

During the first four months of 2011, combined orders of rigid printed circuit boards and flexible circuits are down 6.7 percent, and shipments of these products are up 5.9 percent over the same period in 2010, IPC analysts say. Further, combined orders of rigid printed circuit boards and flexible circuits in North America dropped by 5.6 percent in April, compared to orders the same month in 2010, while shipments increased 3 percent in April over the same month last year.

The slowdown in sales growth in North American electronic interconnect products is likely to continue through at least this summer, added Denny McGuirk, IPC's president and CEO.

December 2010 was the last time North American orders of rigid printed circuit boards and flexible circuits posted a year-over increase, points out MAE's Keller. Combined shipments of these products, however, have posted steady monthly year-over increases since December 2010 and beyond.

"Growth in North American PCB sales continues to follow normal seasonal patterns and seems to have returned to normal, and the book-to-bill ratio is holding steady at just under parity," concludes IPC's McGuirk. "This suggests the slowdown in sales growth is likely to continue into the third quarter of this year."

Wednesday, June 1, 2011

Fireproof electronic connectors: design challenges

In 2006, the EU introduced the ATEX directive, outlining stringent criteria to offer protection to workers operating equipment in hazardous areas. Heretofore, all equipment and component parts deployed for use within hazardous environments in the EU must meet exhaustive testing standards to assure high performance in work environments where there is a risk of explosions, fire or extreme temperatures. While design engineers can choose simple component parts accredited by the ATEX directive in the assurance that they will perform well in hazardous areas, the strict rules of ATEX testing also extend to all parts of connector systems, such as the sealing caps used to maintain integrity when connectors are not mated. It is with these facts in mind that Stuart Hutchings, marketing manager at UK connector manufacturer Bulgin, has outlined design challenges for creating interconnect equipment for use in hazardous areas.


Tuesday, May 24, 2011

Inside Foxconn's deadly iPad factory after the blast



As reported at EETimes, three workers died and 15 more are injured as a result of an explosion at a iPad manufacturing factory in Chengdu, China, belonging to Taiwanese electronics manufacturer Foxconn, Apple's close OEM partner. The cause of the explosion, which happened on the evening of Friday, May 20, is reported to have been a combustible dust mixture in a duct. CNET has some full reporting on what observers found as they entered the plant after the deadly blast. Some observers believe that the incident could cost Apple upwards of 500K tablets.






Tuesday, May 17, 2011

Tablet HDTV display glimpsed at SID 2011


Samsung is unveiling a prototype 10.1-inch, high-resolution LCD designed for tablets at the SID Display Week 2011 International Symposium this week at the Los Angeles Convention Center. The manufacturer claims the prototype is the first 300-dpi, high-resolution display in the 10.1-inch tablet format, as reported by InformationWeek. While it is still a prototype, Samsung expects the screen -- which requires 40% less power than traditional RGB displays -- to be commercially available for HDTV tablet applications later this year.





Thursday, May 12, 2011

Gigabyte turns up on-board mSATA connections

UK tech blog bit-tech reports that motherboard house Gigabyte is positioning a line-up of future Z68-based motherboards that include an onboard mSATA connection, allowing the user to plug a small SSD card directly into the motherboard. Pretty convenient. Eleven motherboards based on the Z68 Express chipset were introduced this week, and more are on the way, according to Tech Connect Magazine, including four model that include an extra connectivity option, an mSATA port. Ah, the motherboard wars...gotta love 'em.









Tuesday, April 19, 2011

National Defense: Army, Marines face uphill battle to lighten troops’ battery load

National Defense Magazine.org has the story: "Before they go on a mission, soldiers typically want fresh batteries, and they don’t want to have to bring them back. Another nuisance about rechargeables is that each electronic gadget requires specific chargers and batteries that are made by different companies so soldiers end up with a rat’s nest of wires and connectors."

(Ed. Note: We'll have to keep an eye out for more solar battery connector / DC power interconnect -type products and newslets to add to ICW's renewable energy connectivity coverage. The article mentioned here also presents a tidy case example of interconnect technology crossover involving a military application. -- MV)

The article continues, “Soldiers don’t like to recharge because they don’t have portable means to do so, and they have to go back to their base,” said Paul Dev, an energy expert at D-STAR Engineering. Soldiers do not like to carry their dead batteries for an entire mission. Dev said one of the drawbacks of current rechargeables is that they have two-thirds to one-half the energy density of disposable batteries."

"Improving the energy density is essential to making the shift to renewable sources, Schilke said. “We have to learn how to harvest more solar energy,” he said. “We also have to get more efficient at storing.”

"In most areas where U.S. forces deploy, sunlight is plentiful. But garnering that energy will require not only better solar power collectors but also substantial improvements in storage devices, namely, batteries. A shift to renewable energy would require that soldiers embrace rechargeable cells. That, in itself, may be a bridge too far, considering that most soldiers prefer the throwaway type."

"The physics of improving batteries seem rather simple — packing the most amount of energy at the lowest amount of weight. But for most military applications, the most efficient batteries are disposable. That issue alone creates a significant disadvantage for solar energy efforts, as it will require soldiers to trust rechargeable batteries."

Related Renewable Energy Coverage at ICW:
















Thursday, April 14, 2011

Mapping the debate over universal electric car plug standards

In Europe, debate is raging over a common standard for the charging plugs used on electric cars. There are this week reports of "industrial jealousy" between French/Italian and German factions and controversy over the settling of a common European standard. Meanwhile, international competition among Germany, France, the UK and Italy is tightening, especially since the formation of the EV Plug Alliance last year. TheGreenCarWebsite.co.uk's The Green Piece breaks the situation down even further in an informative tech blog.




Monday, April 11, 2011

Dutch inventor debuts electric, extreme-speed 'SuperBus'


An inventor in the Netherlands has developed an electric "super bus" that can carry 23 passengers and reaches top speeds of 250 km/h. The vehicle is the creation of Wubbo Ockels, the Netherlands' first astronaut and currently a professor of aerospace sustainable engineering and technology, as reported by the BBC. The inventor's aim is for the bus -- which cost 13m euros to develop -- to become a new form of public transportation. Ockels will reportedly display the bus at an upcoming trade fair in Dubai.

Wednesday, April 6, 2011

Forbes lays out supply chain lessons from Japan

The business gurus at Forbes have made the call: "If there was any doubt left about the impact of globalization of the supply chain, the news [from Japan] should make it crystal clear: supply chains today are attenuated and extremely vulnerable to repercussions from events far outside the control of those who manage and rely on them."

Forbes' CIO Network columnist Paul Martyn concludes that while "there’s much hope – and a lot of evidence – that Japan will recover quickly from this disaster, what global supply chains look like on the other side is widely unknown"; and, that "one thing is for certain: the disruption provides more than enough evidence of the need to revisit supply chain strategies with a focus on resiliency and flexibility."

Monday, April 4, 2011

Meat and potatoes connectivity, data center edition: Cisco blasts out more 1Gb, 10GbE switch fabric interconnects, expands FCoE offering

We tend to focus a lot on the cutting edge of communications interconnect technology here at ICW; meanwhile, it's also often useful to keep an eye on what the heavy hitters of "found everywhere" computer hardware for data interconnect keep blasting out: more switch fabric technology for firmly entrenched and widely deployed 1Gb Ethernet, 10Gb Ethernet as well as increasingly advanced Fibre Channel FCoE (Fiber Channel over Ethernet) implementations. (Although: FCoE is increasingly in a category all by itself.) Following such routine product releases allows one to keep in mind the fundamentally trending, vastly diverse market for communications interconnect technology - whether for both practical everyday and "leading edge" comms connectivity, there are huge, basically intersecting markets for each type of hardware.








Friday, March 25, 2011

Iran unveils flying saucer; no word on circular connectors

As well as a "light sports aircraft", Iran has unveiled a home-grown unmanned flying saucer in an exhibition of strategic technologies as reported on March 16 by Fars News Agency. Ahem, you have to wonder about the wiring harness design of that flying saucer, whether or not it uses circular connectors, and how many, and by whom. Heh, little connector joke, there, for your Friday afternoon.

Although, probably not so funny. The saucer, dubbed "Zohal," is designed and developed jointly by Farnas Aerospace Company and Iranian Aviation and Space Industries Association (IASIA), and can be used for various missions, including aerial imaging. Equipped with an auto-pilot system, GPS, and two separate imaging systems with HD 10 megapixel picture quality, it is able to take and send images simultaneously. The flying machine reportedly uses a small, portable navigation and monitoring center for transmission of data and images and can fly in both outdoor and indoor spaces.

This design has to represent some sublime victory for Iran in the arena of general "Spy vs. Spy" -type reasoning. We'll disguise our surveillance activities...as extraterrestrial activity! The next time you hear about UFO sightings in the skies over the Middle East, you'll know where to go looking for the Occam's Razor answer. Or, at least, the DoD should.

Also unveiled at the Iranian exhibition was a light sports aircraft designed and developed by Dorna Aerospace Company. The full composite sports plane complies with the Standard Test Method (ASTM) and is evidently the third ISA-class model design introduced in Iran. The plane will reportedly be used for private flights, as well as aerial patrolling and surveillance.

Flying saucers always make for good headlines but this story sounds worthy of some fairly serious consideration on a couple of levels. What do you think?





Monday, March 21, 2011

Avnet sees Japan quake supply disruptions as temporary

“My opinion is the [electronics] supply chain has the ability to adjust fairly quickly,” stated Harley Feldberg, president of Avnet Electronics Marketing, in an interview with The Wall Street Journal. “I’m talking months.” In Feldberg's view, reducing disruptions to customers’ activities in many instances boils down to placing early orders for components or finding other stockpiles, and working to smooth out deliveries so that related products all arrive within the same timeframe.

Wednesday, March 16, 2011

Price of electronics goods may rise following Japan quake disaster

The price of ubiquitous consumer electronics goods such as all forms of personal computers, mobile devices and audiovisual electronics could rise across the world due to shortages of electronic components from disaster-hit Japan, experts warn. UK Guardian industry commentary speculates the cost of memory chips and display panels may increase, while Japanese carmakers operating abroad may face supply chain disruptions. Elsewhere, the question is asked: How will the earthquake affect U.S. carmakers?







Thursday, March 10, 2011

U.S. Senate: Counterfeit electronic parts pose national security risk

The Senate Armed Services Committee (SASC) is turning up the heat on a bi-partisan effort to investigate the "growing problem" of counterfeit electronic parts turning up in the DoD supply chain. Led by Sens. Carl Levin (D-MI) and John McCain (R-AZ), the Senate committee investigation comes in response to a report issued by the U.S. Department of Commerce in January 2010, which found that 39 percent of electronics companies contracted by the DoD encountered counterfeit electronics from subcontractors -- a percentage which more than doubled from 2005 to 2008.


In testimony last week before the House Judiciary Committee, Victoria Espinel, U.S. intellectual property enforcement coordinator for the executive office of the president, said her office is working "intensely" with the DoD and NASA on a plan to stop counterfeit products from entering the military and "critical infrastructure supply chain, which put our military and national security at risk."

We'll continue to follow this story here at Interconnection World.




Friday, March 4, 2011

Apple's new connector accessories bring HDMI to multiple devices

There was a lot of buzz for a lot of reasons surrounding Apple's announcement this week of the iPad 2 -- and device connectivity, as always, accounted for a significant part of that buzz, especially for those in the interconnection sphere, and with particular regard to dissemination of HDMI video.

So, in terms of fresh connector hardware, you should know that a new dock connector dongle accessory brings 1080p HDMI to the iPad 2. But that's not all -- also, Apple's new Digital AV Adapter connects not only the latest iPad, but also existing iOS devices -- including the fourth-gen iPod Touch, and iPhone 4 and iPad 1 -- to HDMI compatible displays.

Something for everyone!




Thursday, February 24, 2011

Everything you need to know about Intel's Thunderbolt

Ars Technica provides the best wrap-up I've seen of Intel's "new" peripheral interconnect, Thunderbolt -- formerly known as Light Peak -- and sound analysis of the apparent operative ethic behind the new technology: to relegate both USB and Firewire to the dustbin of history behind a massive surge of 10 Gbps I/O throughput. Which sounds like a tall order, but with Apple on board now and driving things, who knows?

The Intel-developed technology is coming to market through a technical collaboration with Apple, and is available first on Apple’s new line of MacBook Pro laptop computers. Thunderbolt can reportedly transfer a full-length HD movie in less than 30 seconds, and supports both data and display on a single cable.

Full press release from Intel, here.






Tuesday, February 22, 2011

Amid raging drug war, Mexico still open for business -- and business is good

The facts are what they are: Bloomberg has reported that Mexico's economy grew 5.5 percent in 2010, the highest increase in a decade. At the same time, the country has reportedly moved way up in the rankings for offshore services outsourcing amid the widespread violence of the ongoing, escalating drug war.

Yes, plenty of U.S. manufacturers are doing, and have continued to do, business south of the border. A 'Q and A' by El Paso Inc. with Alan Russell, President/CEO of TECMA Group, a provider of facilities, workforce, cross-border transportation and logistics support for companies that operate in Mexico, illuminates some interesting details of the situation.

While TECMA’s business took a dip over the last 3 years because of the global economic crisis and the drug violence in Juárez, since the middle of 2009, the company has been recovering. Despite the shocking brutality of the drug war, Russell says he is confident that the maquiladora sector is not a target of organized crime, and that the city can still provide a safe environment for business.

Choice excerpts from the El Paso Inc. interview include the following:

Q: What advantages does Mexico have over China?

For the first time in modern history, China is not your obvious answer for your low-cost initiative. Mexico tips the scale and actually provides a lower-cost advantage for many product categories than China does. The North American Trade Agreement provides favorable conditions between the United States, Mexico and Canada, which gives us an advantage over China when it comes to tariffs. The minimum wage is also up in China because of world pressure.

The Chinese are becoming a consumer nation. The currency exchange between the United States and China is causing things from China to be more expensive. And all of those things are the opposite for Mexico. The peso-dollar exchange rate is very attractive now, compared to China. The minimum wages have remained stable. When it comes to transportation, what we produce today can be on a dock in Denver tomorrow morning. And the amount of available employment is plentiful, so the advantages of working in Mexico keep getting greater all the time.

Q: You’ve said that those who survived the last two years are going to see the greatest opportunities of their lives in the next five years. How will those opportunities materialize?

I’ve been doing this for 25 years and that has given me a lot of experience and a lot of ways to see how all the stars have lined up. And with the recovery of the economy, with the advantages of Mexico over the other low-cost options such as China, the attitude of the public and businesses to stay in North America to protect intellectual property rights, as well as the many advantages of being here, I see it as a launching pad. We have 8-million square feet of empty manufacturing space in Juárez, and some say that’s terrible, but look at the opportunities we have to fill that space. It’s there and it’s ready. Our industry laid off 60,000 to 80,000 people; all those people are ready to get back to work. We tell our clients everyday that whatever talent they need, whether it’s plastic injection molding, engineering for welding or precision machining, there is a talent pool in Juárez that can fill that slot.

Q: What’s it like working in Juárez?

There are more patrols and more evidence of security. So far there have been no documented cases of any expatriate being kidnapped or killed. The data tells us it’s a safe place to conduct business, but there are definitely times of the day and places where you shouldn’t be if you’re working in the maquiladora. The data also shows us that the casualties that we see are for the most part hits, not random shootings. That’s not what the environment is like at all. You cross over the border and there’s something short of two million people going about their daily business and conducting life as if absolutely nothing is going on. Now all of us know someone that has been a victim of violence, whether it’s a carjacking or had loved ones killed. Like I said, the data is there and we don’t want to ignore it. But it’s not a failed state. It’s a much different environment. This war is not about ideals, religion or any historic grudges from years past, this is purely economics.

Q: What kind of precautions do you take when you go to Juárez?

I’m probably there three days a week. I have offices on both sides of the border and we are not coy about security issues. The data is there that says you need to take precautions. First we go through training, and we do it frequently, to learn how to handle ourselves in the event we encounter an act of violence, whether it be a carjacking, getting caught in a crossfire, or just being victims of a robbery at the plant. The idea is to walk away, survive and continue with our lives...

Q: The security manager at a large manufacturer in Juárez recently [said] that in the last three years, he has had to deal with extortion cases and that every maquiladora that he knows of has dealt with these cases. Has this been a problem for you?

Absolutely not and I couldn’t disagree more. Now, everything I’m telling you does not relate to a Mexican businessperson. They have another set of preoccupations. I know of no single case of expats being extorted, and I don’t believe this person distinguished among them. We have experienced none of that in our operation. Out of a couple of hundred management level people in our company, we’ve not had any of that.

Q: When Electrolux and Whirlpool announced they wouldn’t expand operations in Mexico, they mentioned the violence. What has been the impact of the violence in the decisions maquiladoras make?

Very little. I think the economy has been making the decisions. Now with Electrolux I understand they chose another city, they just didn’t choose Juárez. I don’t believe the violence was a factor in that decision, you’d have to ask an Electrolux person more specifically. It’s like the rumor that companies said they were leaving because of the violence. I know of no company that has left because of the violence. That might be a convenient thing to say if the economy has worn your business down and you have to close your plant.

I think businesses make their plans based on long-term visions. I don’t think any of us sees any of this as permanent. When you build a factory, you’re building it for the next 10 years. You’re not building it based on what’s going on today or even next year. Companies like Electrolux or Foxconn that have huge operations tend to look at geographic diversity, in case there’s an earthquake or a border closing or some catastrophic event close to their plants. They want to spread the risk.

Q: In the last few months of 2010, 14 plants closed in Juárez.

Certainly 14 plants closing is not good news, but it’s part of the great recession. This is the worst one that we have seen in modern history, so some of those plants probably closed as a result of worldwide restructuring. And some of that was that they just didn’t have enough projection to justify keeping the plant open. But I would also anticipate that those companies will be back as the economy turns.








Friday, February 18, 2011

The shocking truth of solar installation quality

Solar panels are supposed to be a set-and-forget technology, and many perform just as advertised. But solar array experts are increasingly finding poor workmanship when they do spot checks of installed systems. When improperly installed joints corrode, connections loosen, wires fray, and breakdowns are inevitable.

So reports solar blogger Maureen McHale at Solar Knowledge, in a detailed article with photos of incorrectly installed equipment discovered in the field on a case by case basis when it came down to inspecting the integrity of the nascent solar energy base. Code violations and dangling conductors abound.

Solar energy plant instability is no joke. “Not only is there a potential for an increase in system failures, but there is also a potential for a rise in unsafe and potentially lethal situations,” said Corey Asbill of New Mexico State University.



Monday, February 14, 2011

EV charging stations for the garageless

350Green sees a world of urban drivers who don’t have garages. As such, the company is looking to advance its marketing and implementation of public EV charging stations, beginning with “fast charging station plazas” in the San Francisco Bay Area cities of Albany, Menlo Park, Millbrae, Palo Alto, San Francisco and Sunnyvale. The company says it will focus on “parking lots of select, high-traffic retail locations” for charging plazas "that will go in at no cost to the hosts," as reported at Earth Techling. According to the 350Green website, its PowerDock offers up to four simultaneous charges, and it has an “Express Plaza” that can work off solar panels.




Sunday, February 6, 2011

Manufacturing data boosts markets amid Egyptian turmoil

Strong manufacturing data from the U.S. and Europe buoyed economic markets, abating some worries over political unrest and social turmoil in Egypt. The news also allayed concerns over the euro's ongoing debt crisis. "Fear over Egypt has subsided and investors turned their focus back to the economic data which have definitely been strong," said Charles Comiskey, head of Treasury trading at Bank of Nova Scotia in New York, in a Dow Jones Newswire report found at The Wall Street Journal.

Comiskey added, "We know that manufacturing has led in terms of economic recovery and the drags still come from housing and jobs."

So, kudos for players in the markets for PCB, electronics manufacturing, telecom, military, and wiring harness, and for multi-faceted interconnect industry at large. Slow and steady wins the race? All grist for the mill and the blog, as we chart the state of the connector industry in the 21st century, just beyond the decade mark.






Thursday, February 3, 2011

3D tech rabbit hole goes deeper than you think

3D technology has been in the news lately. Roger Ebert, to name one luminary, isn't a fan of it, because the quality of the end product in cinema is arguably diminished. But we all know that there is more to life than just what we see in the movies! A/V technology wonks in particular might look at the technology from a somewhat different perspective, i.e.: How fun could 3D digital projection be if used in otherwise potentially bland environments, such as the classroom or corporate events? HDTV is a huge market for consumer tech hardware, no matter how you slice it -- and 3DTV definitely accounts for a slice of that pie.

Ebert also points out at some length, via a letter from Dean Goodhill, the inventor of MaxiVision48 (MV48), that the rabbit hole for A/V digital projection technology in general goes pretty deep -- deeper than you might think.


RELATED STORIES from Interconnection World:

Saturday, January 29, 2011

A Smarter USB Connector

The hardware gurus over at Tom's Guide have zeroed in on a spanking new USB connector design. "The Double USB" uses two contact plates instead of the standard one-plate design and can face up or down when plugged into a USB port. Overall the design ensures that there will always be a contact layer within the connector no matter which side is facing up.

As noted at Tom's, "this seemingly eliminates one of the most annoying aspects about USB technology: having to figure out which side is up before plugging in a peripheral or thumb drive.

The new plug works by incorporating a second plastic plate containing the necessary contacts to make a digital connection. Both plates fill the entire metal tube, but the plug incorporates a spring on each contact plate, allowing one to be pushed back into the plug base when connecting to a USB port.

The plate then pops back into the steel tube when the cord is disconnected. Flip the connector over and the other plate is pushed back."

Source: [Tom's Guide]